XT Document

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== XFace ======

**//Inherited from//**  [[class::domain::xgeometry|XGeometry]],

**//Inherited by//**  NULL

**//Friend class//**  GeometryManager,

**//Description//**

XFace封装了几何面的数据及其方法，其类型标识名为“CGEOFACE”(以CGEO为前缀）。几何面是由若干边构成的封闭曲面，是划分面网格的对象基础。XFace从XGeometry继承并重新实现了适用于面的方法。

**//Members//**
  * XBoundBox [[xface#m_dboundbox|m_dBoundBox]]
  * RGBAColor [[xface#m_bakcolor|m_BakColor]]
  * XRenderData [[xface#m_renderdata|m_RenderData]]
  * XItemPtrArray<XGeometry, [[xface#2>|2>]]
  * XItemPtrArray<XGeometry, [[xface#m_upperlist|m_UpperList]]
  * vector<ElemPtr> [[xface#m_psolidelems|m_pSolidElems]]
  * vector<int> [[xface#m_psolidfacetid|m_pSolidFacetId]]
**//Public interface//**
  * static void [[xface#enablefinefacetnormal|enableFineFacetNormal]](bool b)
  * [[xface#xface1|XFace]](ulong id,XMemPool * pHashPool = 0)
  * [[xface#~xface|~XFace]]()
  * void [[xface#updateboundbox|updateBoundbox]]()
  * real [[xface#getarea|getArea]]() const
  * int [[xface#counttess|countTess]]() const
  * void [[xface#buildrenderdata_withindex|buildRenderData_WithIndex]](const float * rvalue = NULL, bool bUseSolidElemCode = false)
  * void [[xface#buildrenderdata_polygon|buildRenderData_Polygon]](bool bUseSolidElemCode = false)
  * void [[xface#buildrenderdatafvm|buildRenderDataFVM]](bool bUseSolidElemCode = false)
  * void [[xface#buildrenderdata|buildRenderData]](bool bUseSolidElemCode = false)
  * void [[xface#updateelemencode|updateElemEncode]](bool bAsSolid = false)
  * const XRenderData * [[xface#getrenderdata|getRenderData]]() const
  * void [[xface#updaterenderdata|updateRenderData]](const float * colorValue, int colorLoc, const float * deformX, const float * deformY, const float * deformZ, const int * elemNodeIndex = NULL)
  * void [[xface#updaterenderdatafvm|updateRenderDataFVM]](const RenderContext * rc)
  * void [[xface#updatetexdata|updateTexData]](TexElementManager * texMgr)
  * const XBoundBox & [[xface#getboundbox|getBoundBox]]() const
  * void [[xface#normalizeboundbox|normalizeBoundBox]](const real * origin, real scale)
  * void [[xface#restoreboundbox|restoreBoundBox]](const real * origin, real scale)
  * void [[xface#copyboundbox|copyBoundBox]](const XFace * f)
  * void [[xface#clear|clear]](ClearFlag f = Clear_All)
  * const XGeometry * [[xface#getupperentity|getUpperEntity]](int index) const
  * const XSolid * [[xface#getfirstparentbody|getFirstParentBody]]() const
  * bool [[xface#isupperentity|isUpperEntity]](const XGeometry * pBody) const
  * int [[xface#getuppercount|getUpperCount]]() const
  * void [[xface#addupperentity|addUpperEntity]](const XGeometry * pBody)
  * void [[xface#removeupperentity|removeUpperEntity]](const XGeometry *pBody)
  * void [[xface#write|write]](XBinaryIO * io)const
  * ErrorCode [[xface#read|read]](GeometryManager * esmgr, XBinaryIO * io)
  * void [[xface#updateafterrenumber|updateAfterRenumber]](TypeID tid)

----

{{anchor:m_dboundbox}}
**XBoundBox m_dBoundBox**

几何面的包围盒

{{anchor:m_bakcolor}}
**RGBAColor m_BakColor**

几何面的颜色备份，用于修改颜色时保存旧的颜色以方便恢复之前的颜色。

{{anchor:m_renderdata}}
**XRenderData m_RenderData**

几何面的视图数据

{{anchor:m_upperlist}}
**XItemPtrArray<XGeometry, 2> m_UpperList**

几何面的父拓扑对象数组

{{anchor:m_psolidelems}}
**vector<ElemPtr> m_pSolidElems**

面单元所对应的体单元数组

{{anchor:m_psolidfacetid}}
**vector<int> m_pSolidFacetId**

面单元在所对应的体单元的面号数组

----

{{anchor:enablefinefacetnormal}}
**static void enableFineFacetNormal(bool b)**
  *function: 是否以精细模式计算面法向（精细模式下会耗用更多的计算资源）
  *parameters: 
    - [i]bool b: 是否精细模式
  *return value: 无

{{anchor:xface1}}
**XFace(ulong id,XMemPool * pHashPool = 0)**
  *function: 构造函数
  *parameters: 
    - [i]ulong id: 对象ID
    - [i]XMemPool * pHashPool = 0: 内存池
  *return value: 无

{{anchor:~xface}}
**~XFace()**
  *function: 析构函数 
  *parameters: NULL
  *return value: 无

{{anchor:updateboundbox}}
**void updateBoundbox()**
  *function: 更新几何面的包围盒
  *parameters: NULL
  *return value: 无

{{anchor:getarea}}
**double getArea() const**
  *function: 计算几何面的面积
  *parameters: NULL
  *return value: 几何面的面积

{{anchor:counttess}}
**int countTess() const**
  *function:  获取几何面的三角片个数
  *parameters: NULL
  *return value: 几何面的三角片个数

{{anchor:buildrenderdatafvm}}
**void buildRenderDataFVM(bool bUseSolidElemCode = false)**
  *function: 构建有限体积法下的几何面渲染视图数据
  *parameters: 
    - [i]bool bUseSolidElemCode = false: 是否使用体单元编码渲染，在旋转体单元模式下设置为true
  *return value: 无

{{anchor:buildrenderdata}}
**void buildRenderData(bool bUseSolidElemCode = false)**
  *function: 构建几何面的渲染视图数据
  *parameters: 
    - [i]bool bUseSolidElemCode = false: 是否使用体单元编码渲染，在旋转体单元模式下设置为true
  *return value: 无

{{anchor:updateelemencode}}
**void updateElemEncode(bool bAsSolid = false)**
  *function: 更新视图数据中的单元颜色编码
  *parameters: 
    - [i]bool bAsSolid = false: 是否使用体单元编码渲染，在旋转体单元模式下设置为true
  *return value: 无

{{anchor:getrenderdata}}
**const XRenderData * getRenderData() const**
  *function: 获取几何面的渲染视图数据
  *parameters: NULL
  *return value: 无

{{anchor:updaterenderdata}}
**void updateRenderData(const float * colorValue, int colorLoc, const float * deformX, const float * deformY, const float * deformZ, const int * elemNodeIndex = NULL)**
  *function: 更新几何面的渲染视图数据
  *parameters: 
    - [i]const float * colorValue: 渲染数值地址
    - [i] int colorLoc: 渲染数值的位置（积分点、单元节点或节点）
    - [i] const float * deformX: X变形分量数组地址
    - [i] const float * deformY: Y变形分量数组地址
    - [i] const float * deformZ: Z变形分量数组地址
    - [i] const int * elemNodeIndex = NULL: 单元节点数组索引
  *return value: 无

{{anchor:updaterenderdatafvm}}
**void updateRenderDataFVM(const RenderContext * rc)**
  *function: 更新几何面的渲染视图数据
  *parameters: 
    - [i]const RenderContext * rc: 渲染数据上下文
  *return value: 无

{{anchor:updatetexdata}}
**void updateTexData(TexElementManager * texMgr)**
  *function: 更新几何面的渲染纹理数据
  *parameters: 
    - [i]TexElementManager * texMgr: 纹理对象管理器
  *return value: 无

{{anchor:getboundbox}}
**const XBoundBox & getBoundBox() const**
  *function: 获取几何面的包围盒
  *parameters: NULL
  *return value: 几何面的包围盒 

{{anchor:normalizeboundbox}}
**void normalizeBoundBox(const real * origin, real scale)**
  *function: 归一化几何面的包围盒
  *parameters: 
    - [i]const real * origin: 归一化基准点
    - [i] real scale: 归一化系数
  *return value: 无

{{anchor:restoreboundbox}}
**void restoreBoundBox(const real * origin, real scale)**
  *function: 归一化之后恢复几何面的原始包围盒
  *parameters: 
    - [i]const real * origin: 归一化基准点
    - [i] real scale: 归一化系数
  *return value: 无

{{anchor:copyboundbox}}
**void copyBoundBox(const XFace * f)**
  *function: 拷贝几何面对象的包围盒
  *parameters: 
    - [i]const XFace * f: 参考几何面对象
  *return value: 无

{{anchor:clear}}
**void clear(ClearFlag f = Clear_All)**
  *function: 清空几何面的数据
  *parameters: 
    - [i]ClearFlag f = Clear_All: 清空标记
  *return value: 无

{{anchor:getupperentity}}
**const XGeometry * getUpperEntity(int index) const**
  *function: 重新实现XGeometry的getUpperEntity方法，获取第index个父拓扑对象
  *parameters: 
    - [i]int index: 父拓扑对象序号
  *return value: 父拓扑对象

{{anchor:getfirstparentbody}}
**const XSolid * getFirstParentBody() const**
  *function: 获取第一个父拓扑对象
  *parameters: NULL
  *return value: 第一个父拓扑对象

{{anchor:isupperentity}}
**bool isUpperEntity(const XGeometry * pBody) const**
  *function: 判断pBody是否为几何面对象的父拓扑对象
  *parameters: 
    - [i]const XGeometry * pBody: 几何拓扑对象
  *return value: pBody为几何面对象的父拓扑对象返回true，否则返回false

{{anchor:getuppercount}}
**int getUpperCount() const**
  *function: 获取父拓扑对象的个数
  *parameters: NULL
  *return value: 父拓扑对象的个数

{{anchor:addupperentity}}
**void addUpperEntity(const XGeometry * pBody)**
  *function: 添加父拓扑对象
  *parameters: 
    - [i]const XGeometry * pBody: 父拓扑对象
  *return value: 无

{{anchor:removeupperentity}}
**void removeUpperEntity(const XGeometry *pBody)**
  *function: 删除父拓扑对象
  *parameters: 
    - [i]const XGeometry *pBody: 父拓扑对象
  *return value: 无

{{anchor:write}}
**void write(XBinaryIO * io)const**
  *function: 将几何面对象写入到二进制文件中
  *parameters: 
    - [i]XBinaryIO * io: 二进制文件句柄
  *return value: 无

{{anchor:read}}
**ErrorCode read(GeometryManager * esmgr, XBinaryIO * io)**
  *function: 从二进制文件中读取几何对象数据
  *parameters: 
    - [i]GeometryManager * esmgr: 几何对象管理器
    - [i] XBinaryIO * io: 二进制文件句柄
  *return value: 成功读取返回Error_None,否则返回相应错误码

{{anchor:updateafterrenumber}}
**void updateAfterRenumber(TypeID tid)**
  *function: 在对模型对象重编号之后调用，用以更新对重编号对象的引用
  *parameters: 
    - [i]TypeID tid: 重编号的对象类型
  *return value: 无
XT Document

User Tools

Site Tools

Page Tools
